Opus: opus_defines.h File Reference

Opus audio codec (RFC 6716): API and operations manual
| 1.6.1

Loading...
Searching...
No Matches
opus_defines.h File Reference

Opus reference implementation constants. More...

`#include "opus_types.h"`

Go to the source code of this file.

## Macros
#define | OPUS_OK
| No error.
#define | OPUS_BAD_ARG
| One or more invalid/out of range arguments.
#define | OPUS_BUFFER_TOO_SMALL
| Not enough bytes allocated in the buffer.
#define | OPUS_INTERNAL_ERROR
| An internal error was detected.
#define | OPUS_INVALID_PACKET
| The compressed data passed is corrupted.
#define | OPUS_UNIMPLEMENTED
| Invalid/unsupported request number.
#define | OPUS_INVALID_STATE
| An encoder or decoder structure is invalid or already freed.
#define | OPUS_ALLOC_FAIL
| Memory allocation has failed.
#define | OPUS_AUTO
| Auto/default setting.
#define | OPUS_BITRATE_MAX
| Maximum bitrate.
#define | OPUS_APPLICATION_VOIP
| Best for most VoIP/videoconference applications where listening quality and intelligibility matter most.
#define | OPUS_APPLICATION_AUDIO
| Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input.
#define | OPUS_APPLICATION_RESTRICTED_LOWDELAY
| Only use when lowest-achievable latency is what matters most.
#define | OPUS_APPLICATION_RESTRICTED_SILK 2052
| Experts only: forces SILK encoding; don't allocate CELT state at all.
#define | OPUS_APPLICATION_RESTRICTED_CELT 2053
| Experts only: forces CELT encoding; don't allocate SILK state at all.
#define | OPUS_SIGNAL_VOICE 3001
| Signal being encoded is voice.
#define | OPUS_SIGNAL_MUSIC 3002
| Signal being encoded is music.
#define | OPUS_BANDWIDTH_NARROWBAND
| 4 kHz bandpass
#define | OPUS_BANDWIDTH_MEDIUMBAND
| 6 kHz bandpass
#define | OPUS_BANDWIDTH_WIDEBAND
| 8 kHz bandpass
#define | OPUS_BANDWIDTH_SUPERWIDEBAND
| 12 kHz bandpass
#define | OPUS_BANDWIDTH_FULLBAND
| 20 kHz bandpass
#define | OPUS_FRAMESIZE_ARG 5000
| Select frame size from the argument (default).
#define | OPUS_FRAMESIZE_2_5_MS 5001
| Use 2.5 ms frames.
#define | OPUS_FRAMESIZE_5_MS 5002
| Use 5 ms frames.
#define | OPUS_FRAMESIZE_10_MS 5003
| Use 10 ms frames.
#define | OPUS_FRAMESIZE_20_MS 5004
| Use 20 ms frames.
#define | OPUS_FRAMESIZE_40_MS 5005
| Use 40 ms frames.
#define | OPUS_FRAMESIZE_60_MS 5006
| Use 60 ms frames.
#define | OPUS_FRAMESIZE_80_MS 5007
| Use 80 ms frames.
#define | OPUS_FRAMESIZE_100_MS 5008
| Use 100 ms frames.
#define | OPUS_FRAMESIZE_120_MS 5009
| Use 120 ms frames.
#define | OPUS_SET_COMPLEXITY(x)
| Configures the encoder's computational complexity.
#define | OPUS_GET_COMPLEXITY(x)
| Gets the encoder's complexity configuration.
#define | OPUS_SET_BITRATE(x)
| Configures the bitrate in the encoder.
#define | OPUS_GET_BITRATE(x)
| Gets the encoder's bitrate configuration.
#define | OPUS_SET_VBR(x)
| Enables or disables variable bitrate (VBR) in the encoder.
#define | OPUS_GET_VBR(x)
| Determine if variable bitrate (VBR) is enabled in the encoder.
#define | OPUS_SET_VBR_CONSTRAINT(x)
| Enables or disables constrained VBR in the encoder.
#define | OPUS_GET_VBR_CONSTRAINT(x)
| Determine if constrained VBR is enabled in the encoder.
#define | OPUS_SET_FORCE_CHANNELS(x)
| Configures mono/stereo forcing in the encoder.
#define | OPUS_GET_FORCE_CHANNELS(x)
| Gets the encoder's forced channel configuration.
#define | OPUS_SET_MAX_BANDWIDTH(x)
| Configures the maximum bandpass that the encoder will select automatically.
#define | OPUS_GET_MAX_BANDWIDTH(x)
| Gets the encoder's configured maximum allowed bandpass.
#define | OPUS_SET_BANDWIDTH(x)
| Sets the encoder's bandpass to a specific value.
#define | OPUS_SET_SIGNAL(x)
| Configures the type of signal being encoded.
#define | OPUS_GET_SIGNAL(x)
| Gets the encoder's configured signal type.
#define | OPUS_SET_APPLICATION(x)
| Configures the encoder's intended application.
#define | OPUS_GET_APPLICATION(x)
| Gets the encoder's configured application.
#define | OPUS_GET_LOOKAHEAD(x)
| Gets the total samples of delay added by the entire codec.
#define | OPUS_SET_INBAND_FEC(x)
| Configures the encoder's use of inband forward error correction (FEC).
#define | OPUS_GET_INBAND_FEC(x)
| Gets encoder's configured use of inband forward error correction.
#define | OPUS_SET_PACKET_LOSS_PERC(x)
| Configures the encoder's expected packet loss percentage.
#define | OPUS_GET_PACKET_LOSS_PERC(x)
| Gets the encoder's configured packet loss percentage.
#define | OPUS_SET_DTX(x)
| Configures the encoder's use of discontinuous transmission (DTX).
#define | OPUS_GET_DTX(x)
| Gets encoder's configured use of discontinuous transmission.
#define | OPUS_SET_LSB_DEPTH(x)
| Configures the depth of signal being encoded.
#define | OPUS_GET_LSB_DEPTH(x)
| Gets the encoder's configured signal depth.
#define | OPUS_SET_EXPERT_FRAME_DURATION(x)
| Configures the encoder's use of variable duration frames.
#define | OPUS_GET_EXPERT_FRAME_DURATION(x)
| Gets the encoder's configured use of variable duration frames.
#define | OPUS_SET_PREDICTION_DISABLED(x)
| If set to 1, disables almost all use of prediction, making frames almost completely independent.
#define | OPUS_GET_PREDICTION_DISABLED(x)
| Gets the encoder's configured prediction status.
#define | OPUS_SET_DRED_DURATION(x)
| If non-zero, enables Deep Redundancy (DRED) and use the specified maximum number of 10-ms redundant frames.
#define | OPUS_GET_DRED_DURATION(x)
| Gets the encoder's configured Deep Redundancy (DRED) maximum number of frames.
#define | OPUS_SET_DNN_BLOB(data, len)
| Provide external DNN weights from binary object (only when explicitly built without the weights).
#define | OPUS_SET_QEXT(x)
| If set to 1, enables quality extension (QEXT), otherwise disables it (default).
#define | OPUS_GET_QEXT(x)
| Gets the encoder's configured quality extension (QEXT).
#define | OPUS_RESET_STATE
| Resets the codec state to be equivalent to a freshly initialized state.
#define | OPUS_GET_FINAL_RANGE(x)
| Gets the final state of the codec's entropy coder.
#define | OPUS_GET_BANDWIDTH(x)
| Gets the encoder's configured bandpass or the decoder's last bandpass.
#define | OPUS_GET_SAMPLE_RATE(x)
| Gets the sampling rate the encoder or decoder was initialized with.
#define | OPUS_SET_PHASE_INVERSION_DISABLED(x)
| If set to 1, disables the use of phase inversion for intensity stereo, improving the quality of mono downmixes, but slightly reducing normal stereo quality.
#define | OPUS_GET_PHASE_INVERSION_DISABLED(x)
| Gets the encoder's configured phase inversion status.
#define | OPUS_GET_IN_DTX(x)
| Gets the DTX state of the encoder.
#define | OPUS_SET_GAIN(x)
| Configures decoder gain adjustment.
#define | OPUS_GET_GAIN(x)
| Gets the decoder's configured gain adjustment.
#define | OPUS_GET_LAST_PACKET_DURATION(x)
| Gets the duration (in samples) of the last packet successfully decoded or concealed.
#define | OPUS_GET_PITCH(x)
| Gets the pitch of the last decoded frame, if available.
#define | OPUS_SET_OSCE_BWE(x)
| Enables blind bandwidth extension for wideband signals if decoding sampling rate is 48 kHz.
#define | OPUS_GET_OSCE_BWE(x)
| Gets blind bandwidth extension flag for wideband signals if decoding sampling rate is 48 kHz.
#define | OPUS_SET_IGNORE_EXTENSIONS(x)
| If set to 1, the decoder will ignore all extensions found in the padding area (does not affect DRED, which is decoded separately).
#define | OPUS_GET_IGNORE_EXTENSIONS(x)
| Gets whether the decoder is ignoring extensions.

## Functions
const char * | opus_strerror (int error)
| Converts an opus error code into a human readable string.
const char * | opus_get_version_string (void)
| Gets the libopus version string.

## Detailed Description

Opus reference implementation constants.